In large stores and large commercial spaces, a common problem is that low-power lights are not enough to evenly cover the entire space, resulting in a noticeable drop in light between two lights. Combining 32 watts of power, 3200 lumens of luminous flux, and a 36-degree beam angle, the RN13 solves exactly this problem — allowing for a wider spacing of lights on the track without compromising the uniformity of light in large spaces such as chain stores, showrooms, and hypermarkets.
Lighting design in large spaces is always an equation between the number of lights, the installation distance and the uniformity of the light. If the light is weak, many lights must be installed close together to cover a large hall, which increases both the initial cost and the energy consumption. With a luminous flux of 3200 lumens, the RN13 allows for an increase in the distance between lights on the track without a noticeable loss of light in the space between; the 36-degree wide angle also makes the light appear as a continuous, uniform surface, rather than forming separate, recognizable circles of light — exactly what is needed in chain stores and hypermarkets, where the shelf layout is usually long and continuous.
This combination of high power and wide angle distinguishes the RN13 from the 25-watt models in the Ronica family that operate at the same angle (such as the RN02): In a small store with a low ceiling, 25 watts of power is usually sufficient, but in a large hall with a higher ceiling height or a wider width, the loss of light intensity with distance becomes more noticeable. With 32 watts and an efficiency of 100 lumens per watt, the RN13 compensates for this loss while keeping energy consumption in a reasonable ratio to the light intensity produced — a point that in large stores with a large number of lights directly affects the annual electricity cost. The OSRAM chip and a CRI of over 90 also ensure that the color quality of the goods remains consistent from the beginning to the end of the shelf with this wide coverage.
In terms of physical construction, the RN13, with its 95mm diameter and 236mm length aluminum body, is precisely designed to dissipate heat from this level of power — an important point in dense installations in large spaces where lights are left on for long, continuous hours. Its matte black body color is less noticeable on industrial and commercial ceilings, allowing the light itself to be seen, not the light. The wide-range input voltage of 110 to 250V also enables installation in large projects with different power grids without the need for additional stabilizing equipment. This product is manufactured in the Alton Ray factory and is offered with a 5-year warranty and free shipping nationwide.
